TEAM RYNKEBY 2027 BIANCHI INFINITO ICR

What’s new?

The bike itself has a change – the tires will be 30 mm wide. The wider tires make the bike even faster and more comfortable at a lower tire pressure – and the choice of using 30 mm will satisfy both the mountain climber and the road enthusiast.

The graphics on the wheelset will change from Veloman to Bianchi – but basically, it’s the same with 30 mm profile and 23 mm internal channel.

But the real change in the TR project will be the possibility to buy optional components at an additional price straight from the factory;

  • electronical gear group, Shimano 105 Di2 12 speed
  • carbon wheelset, Bianchi B 49R a 49 mm profile and 25 mm internal width
  • Bianchi saddle with carbon rails (plastic base, foam padding, women 149mm x 250mm or men 139mm x 250mm)
Mores specs

Disc Brakes

The new 105 12-speed hydraulic disc brakes provide improved steering and braking properties, making going down hills or mountains a better experience - especially in rainy weather. The brake calibers have been redesigned using a new piston – making less chance of brake pads rubbing against the 160 mm rotor.

Gear and Brake Levers

The new ergonomic Dual-Control Lever design fits a wide range of hand sizes and shapes with the possibility to reducing the distance from the hood to the lever. This enhances leverage and delivers better control with less effort.

The brake levers on the new Shimano 12 speed 105 group have been redesigned to improve comfort and can be adjusted to accommodate smaller hands.

11-34T Cassette and Long Cage Derailleur

Supplied as standard with 34T on the largest sprocket on the cassette.

The 12-speed rear derailleur on the 2027 TR bike supports up to 36T on both manual and electronical gears!

Carbon Frame

The 2027 Infinito ICR frame is produced entirely in carbon – called monoque.

With the 2027 Team Rynkeby bike you get the second-best endurance/long-distance frame that Bianchi produces.

The carbon frame is constructed with an equal focus on both comfort and performance, so you can sit comfortably without compromising the bike's handling or performance.

The 2023 and earlier years bike was an entry level bike – the Bianchi Infinito ICR is just below the top! The 2024 Infinito XE frame had the cables visible around the head and down tube – the 2025, 2026 and 2027 has internal cable routing – hiding all the cables. Since all the cables have to pass through the head set area the frame has been redesigned to use 1.5“top and bottom bearings.

It comes with hydraulic disc brakes that provide improved steering and braking properties, making going down hills or mountains a better experience - especially in rainy weather. The hydraulic brake cables are hidden internally in the frame.

With disc brakes, you can replace the parts that gets worn when you use the brakes – which is the brake pads and the rotor disc. Disc wheels will last much longer than a rim brake wheelset.

The Infinito ICR is a bike designed for both the average and the experienced riders, but a beginner can also handle it easily. Supplied as standard with 34T on the largest sprocket on the cassette (you can use up to 36T without changes to the gear system). You can, therefore, get up hills and mountains easily.

The suggested retail price in the shops is DKK 23.097 (€ 3.090) - but you can get the Team Rynkeby Bianchi Infinito ICR for only DKK 14.763 (€ 1.976*).

*Prices are subject to local VAT rates and may therefore vary by country

TEAM RYNKEBY BIANCHI INFINITO ICR 2027

FRAME: Bianchi Infinito ICR Disc carbon frame for both mechanical and electronical gears – rear 12x142 mm thru axle compatible with 32” tires – using 1.5” bearings in both top and bottom of the head set.

FORK: Bianchi Full Carbon FC20 Disc for 1.5" bearing, thru-axle 12x100 mm thru axle compatible with 32” tires.

GROUPSET: Shimano 105 12-speed mechanical gear with hydraulic disc brakes, model R7100/7120 mechanical. Optional Shimano 105 Di2 12-speed model 7150/7170).

CRANKSET: Shimano 105 12-speed model FC-R7100 Compact 50x34T hollowtech 2. Crank Length: 170mm on frame size 47-53cm, 172.5mm on frame 55-57cm and 175mm on frame 59-61cm.

CASSETTE: Shimano 105 12-speed model CS-R7100 11-34T (11-12-13-14-15-17-19-21-24-27-30-34T).

DERAILLEUR (FRONT): Shimano 105 mechanical 12-speed model FD-R7100, brazed-on type. (Supports 50-54T big chainrings with a maximum difference of 16T to the small chainring). Optional Shimano 105 Di2 12-speed model FD-R7150, brazed-on type.

DERAILLEUR (REAR): Shimano 105 mechanical 12-speed model RD-R7100 – supports up to 36T cassettes. Optional Shimano 105 Di2 model RD-R7150.

STEM: Velomann Satori Viper, Alloy 6061, raise 7°, oversize 1 1/8". Stem lengths will be 80mm on frame size 47cm, 90mm on frames 50-53cm, 100mm on frame 55, 110mm on frame 57-59cm and 120mm on frame 61cm. (The stem is a special designed for this frame – normal stems can be used – however, due to the fact that all cables have to pass into/underneath the stem and continue in through the head set and into the downtube, the design will not match normal stems).

BOTTOM BRACKET: Shimano SM-BB72-41B press fit BB86 bearing 86,5x41.

CHAIN: Shimano 12-speed CN-M7100, 112link for HG with quick link.

DISC ROTORS: Shimano 160mm centre lock front & rear, model RT-CL700 (internal spline) with Ice Technology.

HANDLEBARS: Velomann RA35A Compact, alloy 6061 diam. 31,8mm, reach 80mm, drop 130mm. Handlebar width is 380mm on frame size 47cm, 400mm on frame 50-53cm, 420mm on frame 55-57cm and 440mm on frame 59-61cm.

PEDALS: Shimano PD-R550-L, composite SPD-SL pedal w/cleat SM-SH11, black.

SADDLE FOR MEN: Velomann Mitora139.1, size 250x139mm, steel rail. Optional a Bianchi saddle with carbon rails.
SADDLE FOR WOMEN: Velomann Mitora149.1, size 250x149mm, steel rail. Optional a Bianchi saddle with carbon rails.

SEATPOST: Velomann SP155T.2, alloy shaft 2014, head alloy 6061, Steel, Setback 25mm, two lengths L350 and 380mm. On frames 47-57cm is used L350mm and on frames 59-61cm is used L380mm. (The seatpost is a special design for this frame – normal seatpost cannot be used due to the special shape. If you desire a 0mm setback model – you have to buy a Bianchi carbon seatpost with a 0mm setback clamp mount).

TAPE: Bianchi Arrow premium tape, 2.5mm thickness, full black, with black plugs Bianchi logo

TYRES: 30 mm Zaffiro EVO V 30-622 700 x 30c, G2.0.

WHEELSET: Bianchi model B30R alloy HG body, 23mm channel, 30mm rim profile, Tubeless compatible/ready with an after marked kit (tubeless tires, valve and liquid sealant). Optional a carbon wheelset Bianchi B 49R with a 49 mm profile and 25 mm internal width.

COLOURS: Team Rynkeby special paint – yellow colour with pearl finish.

BOTTLE CAGE: Two pieces in aluminium, model Bianchi CK.

WATER BOTTLE: Two pieces Bianchi Celeste green.